Verifying Initial Setup; Placing A Test Call; Checking The Network Connectivity Indicators On The Main Screen - Polycom ViewStation FX4000 User Manual

Verifying Initial Setup

Placing a Test Call

Checking the Network Connectivity Indicators on the Main
Screen
© Polycom, Inc. 2002
After the initial system configuration is complete, the system
returns to the main menu.
The main screen is the starting point for everything you do on the
ViewStation FX and VS4000. From the main screen you can access
the Video Phone screen (by selecting the Video Call icon), the
Address Book, all the System Info screens, and the Telephone.
The following information explains how to place a test call, and how
to interpret the main screen's network connectivity indicators.
Once you have configured your ViewStation FX or VS4000, you can
place a test call to one of the numbers that have been
pre-programmed into the Address Book of your ViewStation FX or
VS4000.
To place a test call:
1. Highlight the Address Book icon on the main screen and press
the SELECT button on the remote control.
2. Highlight the Address Book icon again and press the SELECT
button on the remote control.
3. Use the arrow buttons on the remote control to select a location
and press the SELECT button on the remote control to place the
call.
Network connectivity indicators are also displayed on the main
screen (see the following section for more information).
Chapter 3 - Initial System Setup
99