Start - Siemens SIMATIC HMI Industrial Thin Client ITC1200 Operating Instructions Manual

Assigning device parameters
5.4 Remote configuration of several devices
4. Accept the license agreement and close the dialog with "Next".
5. Select a network adapter for the network, and close the dialog with "OK". The network
6. Complete the installation at the end of the installation process with the "Finish" button.
Result
Remote Configuration Center is installed in the default directory, "C:\Program
Files\Siemens\".
See also
Product Support SIMATIC Thin Client
(http://support.automation.siemens.com/WW/view/en/59368467/130000)
5.4.3

Start

1. Start Remote Configuration Center via "Start > SIMATIC > Thin Client Configuration
The "Home page" tab is loaded by default following startup, displaying the firmware version
and its serial number. If you select "Help" in the menu bar, help is displayed.
68
The "Set PG-PC Interface" dialog appears.
adapter can be changed later via the Windows system settings.
We recommended that you reboot the PC.
Center Vx.y.z > Remote Configuration Center".
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02