Operating The On-Screen Keyboard - Siemens SIMATIC HMI Industrial Thin Client ITC1200 Operating Instructions Manual

Operating the device

7.4 Operating the on-screen keyboard

7.4 Operating the on-screen keyboard
On-screen keyboard
If you have not connected an external keyboard to the device, use the on-screen keyboard
for inputs, e.g., in the configuration settings.
If you activate an IO field when accessing a WinCC flexible or WinCC project on a server,
the on-screen keyboard is displayed automatically.
Note
On-screen keyboard
A German-language on-screen keyboard and an English-language on-screen keyboard are
available on the device. The keyboard language is set in the Start menu "Configuration >
System".
Operating the on-screen keyboard
You operate the on-screen keyboard by directly touching the keys of the keyboard on the
touch screen. The functions of the keys on the on-screen keyboard are basically the same
as those on an external keyboard.
You can move the on-screen keyboard as shown below:
● In the desktop settings, you can position the on-screen keyboard at the top
● Depending on the position at the screen edge, the buttons
● The button
● The button
94
④
edge of the screen.
②
closes the on-screen keyboard.
③
moves the on-screen keyboard to the other edge of the screen (top or
bottom).
②
and
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
①
or bottom
③
on the right change: