Device Data - Siemens SIMATIC HMI Industrial Thin Client ITC1200 Operating Instructions Manual

Assigning device parameters
5.3 Configuration settings of the device
See also
Network settings (Page 46)
System settings (Page 41)
Password settings (Page 58)
Setting up startup connection (Page 56)
5.3.2

Device data

The following figure shows the device data in the Start menu "Configuration > Information".
The device data identify the device uniquely and are shown here for informational purposes
only. You edit the device data in the System settings (Page 41) and Network settings
(Page 46). The home page of the web browser also displays device data and network
settings.
Note
Information is not displayed.
"Status" and "Status message" are only displayed in the remote configuration and not on the
device. If no administrator is logged on, the configuration settings only show the
"Information" submenu.
40
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02