Profinet Basic Functions - Siemens SIMATIC HMI Industrial Thin Client ITC1200 Operating Instructions Manual

5.3.5.5

PROFINET basic functions

Introduction
The PROFINET basic functions help to diagnose the device using standard mechanisms.
The required diagnostics functions are available, for example, in STEP 7.
Functions
As of SIMATIC Manager V5.4, SP2, the PROFINET basic functions offer the following
functions:
● As soon as the device is connected to PROFINET, it is displayed as an available device
● You can assign a name and an IP address to the device in SIMATIC Manager under
● As of TIA Portal V12: The device can be configured in the topology editor.
See also
PassiveComponentsInstaller.zip
(http://support.automation.siemens.com/WW/view/en/30840898)
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
in the Lifelist in SIMATIC Manager. You can view the properties of the device, e.g., IP
address.
Additional information from the "Target system" context menu is not supported by the
device.
"Target system > Edit Ethernet device".
Assigning device parameters
5.3 Configuration settings of the device
57