Accessories; Typical Applications - Siemens SIMATIC HMI Industrial Thin Client ITC1200 Operating Instructions Manual

1.4

Accessories

Accessories are not included in the scope of delivery of the HMI device, but can be ordered
on the Internet at Industry Mall (http://mall.automation.siemens.com).
This section provides information on the scope of accessories available at the time these
operating instructions were written.
Protective films
Designation
Protective film set for ITC1200
Protective film set for ITC1500
Protective film set for ITC1900
Protective film set for ITC2200
Service packages
Designation
Set of 20 aluminum mounting clamps for ITC1200
Set of 20 steel mounting clamps for ITC1500, ITC1900, and ITC2200
Set of 10 mains terminals
1.5

Typical applications

Industrial Thin Clients can be used as operator terminals in different scenarios. With the
Industrial Thin Client, for example, you can access an HMI device and hence control a work
process. You can also use the Industrial Thin Client to run Office applications on a server, for
example, on a PC and modern web applications.
Typical applications are presented in the following.
Access to a Sm@rtServer
The Industrial Thin Client accesses an HMI device or industrial PC as a Sm@rtServer client
using the SIMATIC WinCC Sm@rtServer option. You are operating and monitoring a WinCC
project (TIA portal). You operate and monitor a WinCC flexible project with the SIMATIC
WinCC Sm@rtAccess option in the same way.
The following figure shows one possible configuration.
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
Overview
1.4 Accessories
Order No.
6AV2124-6MJ00-0AX0
6AV2124-6QJ00-0AX0
6AV2124-6UJ00-0AX0
6AV2124-6XJ00-0AX0
Order No.
6AV6671-8XK00-0AX0
6AV6671-8XK00-0AX3
6AV6671-8XA00-0AX0
13