Assigning Device Parameters; Possible Applications; Opening The Configuration - Siemens SIMATIC HMI Industrial Thin Client ITC1200 Operating Instructions Manual

Assigning device parameters

5.1

Possible applications

Possible applications
The Industrial Thin Client can fulfill the following functions as an operator terminal:
● Access to an HMI device as a Sm@rtServer client via the WinCC Sm@rtServer option.
● Access as a client via the "RDP" protocol (Windows programs).
● Access as a client via the "VNC" protocol (Windows programs).
● Access to a SINUMERIK PCU or NCU as a SINUMERIK Thin Client Unit (TCU).
● Access as a web client to a web server, e.g. of an S7 controller or the Intranet.
When the device accesses a server, for example, an HMI device or a PC, as a client, the
screen display of the server is shown on the screen of the Industrial Thin Client. The user
uses the Industrial Thin Client to access programs or projects on the server.
Note
The documentation refers to "Sm@rtServer", "RDP", "VNC", "SINUMERIK" and "Web" as
connection types.
5.2

Opening the configuration

Introduction
You set the device parameters in the Configuration settings of the device (Page 38).
Note
You can edit the configuration settings of the device as follows:
 Either directly on the device or
 Remotely via PC at your convenience (see section "Remote configuration of several
In the remote configuration, you can also edit several devices at the same time (see section
"Overview of remote operation (Page 69)").
 Restart devices
 Update firmware
 Assign IP addresses, etc.
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
devices (Page 66)"). The settings then appear in a separate configuration window on the
right and on the device itself.
5
35