Table of Contents
Advertisement
9.2
Directives and declarations
9.2.1
Electromagnetic compatibility
Introduction
The device fulfills the requirements of the EMC law of the single European market, among
others.
EMC-compliant device installation
EMC-compliant installation of the device and the use of interference-proof cables provide the
bases for trouble-free operation. The description "Guidelines for Interference-free Setup of
PLCs" is also valid for the device installation.
Use in industry
The device is designed for industrial use, Limit Class A. The following standards are met for
this:
● Requirements for emitted interference, EN 61000-6-4:2007
● Requirements for immunity to interference, DIN EN 61000-6-2:2005
Residential use
Note
Interference with radio / TV reception
The device is not suitable for use in residential areas.
If the device is used in a residential area, you must take measures to achieve Limit Class B
conforming to EN 55016 for RF interference.
A suitable measure for achieving the required RF interference level for Limit Class B
includes for example:
● Installation of the device in a grounded control cabinet
● Use of filters in electrical supply lines
Individual acceptance is required.
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
Technical specifications
9.2 Directives and declarations
103
Advertisement
Table of Contents
