Technical Specifications; Certificates And Approvals - Siemens SIMATIC HMI Industrial Thin Client ITC1200 Operating Instructions Manual

Technical specifications

9.1

Certificates and approvals

Approvals
NOTICE
Applicability
The following overview shows possible approvals. The device itself is certified only as
shown on the rear of the device.
CE approval
The device meets the general and safety-related requirements of the EMC Directive
(2004/108/EC "Electromagnetic Compatibility") and conforms to the harmonized European
standards (EN) for programmable logic controllers published in the official gazettes of the
European Union:
● 94/9/EU "Devices and protection systems for use as prescribed in potentially explosive
● EC Declaration of Conformity
The EC Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens Aktiengesellschaft
Industry Sector
I IA AS FA DH AMB
PO Box 1963
D-92209 Amberg, Germany
UL approval
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
● ANSI/ISA 12.12.01
● CSA-213 (Hazardous Location)
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
areas" (Guidelines for Explosion Protection)
9
101