Changing From One Connection To Another - Siemens SIMATIC HMI Industrial Thin Client ITC1200 Operating Instructions Manual

Operating the device
7.3 Operating the taskbar
Special features
SINUMERIK
The automatic assignment of the IP address is activated temporarily in the network settings.
The SINUMERIK Bootloader briefly displays the IP address of the server currently connected.
The SINUMERIK server first starts the SINUMERIK Bootloader, which loads SINUMERIK
Viewer with the configuration file on the Industrial Thin Client. Afterwards the SINUMERIK
user interface is displayed on the Industrial Thin Client. For additional information on
operation and authorizations, refer to the documentation "SINUMERIK manual "Operator
components and networking" (6FC5397-1AP10-5AA0)
(http://www.automation.siemens.com/doconweb/)".
Note
TCU service menu
To get to the TCU Service menu, close the SINUMERIK Viewer.
See also
Desktop settings (Page 61)
7.3.3

Changing from one connection to another

You can easily change between the started client-server connections.
●
icon.
●
●
92
Connection list: Select a different client-server connection using the
Go to the preceding started client-server connection.
Go to the next started client-server connection.
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02