Table of Contents
Advertisement
5.4.2
Installation
Requirements
The following requirements must be met for operation:
● The Industrial Thin Client is in a PROFINET or Ethernet network.
● At least 1 network adapter is installed in the PC.
● One of the following operating systems is installed on the PC:
● You need administrator rights on your PC.
● You need a PDF reader compatible with Acrobat 5.0 or higher on the PC to read the
● For the remote configuration, a screen resolution of 1280 x 1024 is required on the PC.
● The following destination ports must be accessible on the devices:
Procedure
To install the Remote Configuration Center, proceed as follows:
1. Double-click the self-extracting file "thinclient_configuration_center_V2_0_1.exe" on the
2. Use the "Browse" button to select a directory for temporarily storing the extracted files
3. Follow the instructions displayed on the screen. Press "Next" to switch to the next dialog.
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
– Microsoft Windows XP Professional SP3
– Microsoft Windows Server 2003
– Microsoft Windows Server 2008
– Windows Server 2008 R2 (64-bit)
– Microsoft Windows Embedded Standard 2009
– Microsoft Windows 7 Professional/Ultimate (32-bit and 64-bit)
– Windows Embedded Standard 7 (32-bit and 64-bit)
documentation.
– Port 80
– Port 22
Note
Firewall
The firewall settings are not changed by the installation. You must do this yourself if
necessary.
supplied CD. A dialog for unzipping the file appears in English.
and close the dialog using the "Unzip" button.
The files are unzipped. Installation starts automatically.
Assigning device parameters
5.4 Remote configuration of several devices
67
Advertisement
Table of Contents
