Table of Contents
Advertisement
Assigning device parameters
5.3 Configuration settings of the device
5.3.6
Password settings
Introduction
The following figure shows the password settings in the Start menu "Configuration >
Passwords".
Note
Forced termination of connection
When you save the changed configuration settings, all open client-server connections are
terminated and all open programs are closed without a confirmation prompt. The configured
autostart connections are re-established.
Logging in as an administrator
A user that is not logged on can operate the Start menu, but only the device data (Page 40)
will be visible from the configuration settings ("Configuration > Information").
58
Industrial Thin Client ITC1200, ITC1500, ITC1900, ITC2200
Operating Instructions, 04/2013, A5E03474888-02
Advertisement
Table of Contents
