Paper - Kyocera KM-8030 Advanced Operation Manual

Appendix

Paper

Basic Paper Specifications
This copier is designed to print on standard copy paper as used in regular ('dry') copiers and page
printers such as laser printers. It also supports a variety of other types of paper that conform to the
specifications given in this appendix.
Be careful when choosing paper. Paper unsuitable for the copier may cause jams or may be
wrinkled.
For transparencies, labels, envelopes, and similar types of paper, use the MP tray.
NOTE: Some recycled paper does not meet requirements for use with this copier as listed in the
Basic Paper Specifications shown below, such as moisture or pulp content. For this reason, we
recommend purchasing a small amount of recycled paper as a sample for testing prior to use.
Choose recycled paper that gives the best copying results and contains low levels of paper dust.
We are not responsible for the problems occurred from the use of paper that does not conform to
our specifications.
Supported Paper
Use standard copy paper for regular copiers or laser printers. The copy quality will affected by the
quality of paper. Poor quality paper may results in unsatisfactory outputs.
Basic Paper Specifications
The following table lists the specifications of paper that is supported with this copier. Refer to the
subsequent sections for further details.
Criteria
Weight
Thickness
Dimensional accuracy
Squareness of corners
Moisture content
Grain direction
Pulp content
Appendix-2
Specifications
Cassettes: 60 to 160 g/m²
MP tray: 45 to 200 g/m²
0.086 to 0.110 mm
±0.7 mm
90° ±0.2°
4 to 6 %
Long grain (paper supply direction)
80 % or more