Margin Mode And Centering Originals - Kyocera KM-8030 Advanced Operation Manual

Copying Functions

Margin Mode and Centering Originals

Specify the Margin mode and centering of originals as follows.
1
Press [Edit]. On the next screen, press
[Margin/Centering] ([Margin/Imag.Shift]).
NOTE: The Margin mode and
centering settings apply to all other
steps. Simply complete this setting
once as an initial step.
2 Press [Margin] or [Auto Center] ([Image
shift]). For details, refer to Margin Mode
on page 1-18 or Centering Originals on
page 1-20.
3
Press [Close].
Page Numbering
Specify page numbering in the sequence of originals as follows.
1 Press [Edit]. On the next screen, press
[Page #] ([Page numbering]).
NOTE: The page numbering setting
applies to all other steps. Simply
complete this setting once as an initial
step.
2 For instructions on page numbering,
refer to Page Numbering on page 1-25.
3 Press [Close] to return to the screen of step 1.
1-74
Ready to Job build.
Place originals then press Start key.
Job Build Step
Auto
Off
Border Select Repeat
Erase Orig.Size Copy
None None
Margin/ Select of
Page #
Centering Output
Basic
Quality
Ready to Job build.
Place originals then press Start key.
Margin/Centering
None
Margin
Auto
Center
Ready to Job build.
Place originals then press Start key.
Job Build Step
Auto
Off
Border Select Repeat
Erase Orig.Size Copy
None None
Margin/ Select of
Page #
Centering Output
Basic
Quality
Ready to Job build.
Place originals then press Start key.
Page #
None P.1
-1- 1/n
Off
1 sided copy-Left
Tray A
Finished page #:
Edit
Back
Reposition image to left/right or
top/bottom, and also center image
on paper.
Off
1 sided copy-Left
Tray A
Finished page #:
Edit
Back
Page # can be added on bottom o