Kyocera KM-8030 Advanced Operation Manual page 72

Copying Functions
18
Select the cassette 1. Press [Close] to
return to the screen of step 17.
19 Place original D and press the Start key to start scanning.
Step 7: Specify blank colored paper for the back cover.
Specify the MP tray (for colored paper) for the paper selection setting.
20 Press [Select Paper].
21 Select the MP tray. Press [Close] to
return to the screen of step 20.
22
Press [Insert page] ([Insert blank page]).
23 All originals have been scanned. Press [Scanning finished] to start the job.
24 If there are no problems with the accomplished copies, you can use Repeat Copy to produce
additional copies in the desired quantity as needed. Refer to Repeat Copy on page 1-42 for details.
You are now completed programming the job with a job build.
1-66
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
Select Paper
11x8½"
Plain
11x8½"
Recycled
11x17"
Plain
8½x11"
Plain
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
Job Build Step
1 sided
11x8½"
Select Original
Paper Type
Auto %
Reduce
Finished
/Enlarge
Basic
Quality
Scan next original(s).
Place the originals and press start key.
Press "Scanning finished" key when starting copy.
Select Paper
11x8½"
Plain
11x8½"
Recycled
11x17"
Plain
8½x11"
Plain
riginal(s).
riginals and press start key.
nning finished" key when starting copy.
Step
1 sided 2 sided Copy
Original 1 sided/
Type 2 sided
Auto % Rear
Reduce Orig. Set
/Enlarge Direction
Quality Edit
Back
11x8½"
Color
2 sided Copy
1 sided/
2 sided
2 sided copy-Left
Rear
Finished page #:
Next copy page: Front
Orig. Set
Direction
Edit
Back
MP tray
Color
Set
Cancel
Insert
page
2 sided copy-Left
Print from
Finished page #:
Rear page
Next copy page: Front
Scanning
finished