Job Accounting - Kyocera KM-8030 Advanced Operation Manual

7
Select Name to display and press
[Change #].
8 Enter the department name and press
[End].
For instructions on entering characters,
refer to Entering Characters on Touch
Panel on page 3-55.
9
When all entries are complete, press
[Next].
IMPORTANT: An error will occur if you
do not complete Account ID and Name
to display. You will not be able to
proceed to the next screen. Be sure
that you have completed the entries.
An error will occur if you attempt to
enter an existing department ID code.
You will not be able to proceed to the
next screen. Use a different ID code or
name.
10 Specify restrictions on copying as
desired.
For instructions on restricting copier
usage, refer to Restricting Using the
Copier on page 4-6.
11
Press [Registr.] to finalize settings.
To make settings on another department, press [Register] and repeat steps 4 to 13.
12 Press [Close]. The touch panel will return to the Job Accounting screen.
New register
Setting Item
Account ID 33333333
Name to display (No register)
System Menu - Job -
Name to display
Capital Letter Num./Sym.
ng Item Value
Account ID
ay 3st sales division
- Job - Management Edit
New register
33333333 3st sales division
Setting Item
Copy
Printer
Output limitation
Scanner transmission
System Menu - Job -

Job Accounting

Value
Change #
Management Edit
Limit:32 letters including #
AllDel.
Space
Change #
Next
Value
Permitted
Permitted
No limit
No limit
Change #
Management Edit
Stop
Convert
Cancel
4-5