Kyocera KM-8030 Advanced Operation Manual page 79

Original Size
Specify the original size as follows.
1
Press [Edit]. On the next screen, press
[Select Orig.Size] ([Select Size Orig.]).
2 Select the original size. Refer to Original
Size on page 1-3 for details.
3 Press [Close].
Repeat Copy
Specify Repeat Copy as follows. Use Repeat Copy to enable the production of additional copies as
needed after a copy job is completed.
1
Press [Edit]. On the next screen, press
[Repeat Copy].
NOTE: The Repeat Copy setting
applies to all other steps. Simply
complete this setting once as an initial
step.
2 Press [On] to activate Repeat Copy.
Refer to Repeat Copy on page 1-42 for
details.
3
Press [Close].
Ready to Job build.
Place originals then press Start key.
Job Build Step
Auto
Off
Border Select Repeat
Erase Orig.Size Copy
None None
Margin/ Select of
Page #
Centering Output
Basic
Quality
Ready to Job build.
Place originals then press Start key.
Select Original Size
8½x14"
Auto
Select
11x17" 5½x8½"
size
Input size
8½x11" 8½x5½"
Other
11x8½" 11x15"
stand.Size
Ready to Job build.
Place originals then press Start key.
Job Build Step
Auto
Off
Border Select Repeat
Erase Orig.Size Copy
None None
Margin/ Select of
Page #
Centering Output
Basic
Quality
Ready to Job build.
Place originals then press Start key.
Repeat Copy
Off
On
Copying Functions
Off
1 sided copy-Left
Tray A
Finished page #:
Edit
Back
8½x13½"
8½x13"
A4
A4
Off
1 sided copy-Left
Tray A
Finished page #:
Edit
Back
Repeat copy allows sets to be save
to the HDD.
Using Repeat Copy function,
jobs can be recalled and output.
Individual passwords can be set.
Custo
2x2 "
2x2 "
2x2 "
2x2 "
1-73