Enabling Auto Cassette Switching - Kyocera KM-8030 Advanced Operation Manual

3
Use the numeric keys to enter the
four-digit management code. By default,
the management code is 6000 for 60
cpm model and 8000 for 80 cpm model.
The Machine Default screen will be
displayed.
NOTE: For security, it is recommended to change the management code. Refer to Changing
Management Code on page 3-32.
When installing the optional security kit, enter the eight-digit management code. By default, the
management code is 60006000 for 60 cpm model and 80008000 for 80 cpm model.
Proceed to the following sections to customize individual settings.

Enabling Auto Cassette Switching

If the cassette in use runs out of paper, the copier can continue copying by automatically switching
to another cassette loaded with the paper of the same size and orientation. You can specify not to
switch to the cassette if the paper type differs.
1 Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [ ] or [ ] to select Auto drawer
switching (Auto cassette switching) and
press [Change #].
3 Select [On] to enable automatic cassette
switching.
4
To avoid switching to the cassette loaded with the different paper type, press [Feed same paper
type] under Paper Type.
5 Press [Close]. The touch panel will return to the Machine Default screen.
Enter the administrator number.
System Menu / Counter
Machine Default
Default menu
Auto drawer switching On / All types of paper
Paper size (3rd drawer) 11x17"
Paper size (4th drawer) Auto/Inch
Paper type (1st drawer) Plain
Paper type (2nd drawer) Recycled
System Menu
Auto drawer switching
When paper drawer is empty, switch to another one,
set same size/direction paper, and continue copying.
Function
Off
On
System Menu - Machine Default
System Settings
Setting mode
Change #
Back
Paper Type
All types
of paper
Feed same
paper type
3-21