Kyocera KM-8030 Advanced Operation Manual page 18

Copying Functions
3
Press [1 staple] or [2 staples].
4 Select the staple position.
5
Place the originals in the document processor or on the platen and press the Start key.
If the original is placed on the platen, Scan next original(s) will be displayed. Place the next original
and press the Start key.
After scanning all originals, press [Scanning finished] to start copying.
1-12
Ready to copy.
Staple/Punch
Staple
None None
1 staple 2 holes
2 staples 3 holes
Staple Mode.
50 :maximum capacity
Staple/Punch
Staple Position
None
Left side None
1 staple Right side 2 holes
2 staples Top side 3 holes
Paper Size
Shortcut Back
Punch
Select Original Im
Direction.
Top Edge
Paper Size
Shortcut Back
Punch
Select Original Im
Direction.
Top Edge
11x8½
100%
11x8½
100%