Batch Scanning - Kyocera KM-8030 Advanced Operation Manual

Copying Functions

Batch Scanning

Scans multiple originals for a single copy job without using the document processor. You can also
prepare single copy jobs if there are too many originals to place at once when using the document
processor. Divide the original into smaller sets and scan each set with the document processor. In
Batch Scanning mode, you can continue scanning originals until you press [Scanning finished].
Follow the steps as below to use batch scanning.
1 Press [Function].
2
Press [Batch Scanning].
3
Press [On].
4 Place the originals in the document processor or on the platen and press the Start key.
Place the next original and press the Start key. Repeat these steps to scan the remaining originals.
After scanning all originals, press [Scanning finished] to start copying.
1-40
Ready to copy.
Select 2 sided/ Select
Paper Separation Orig.Size
Exposure Reduce Auto
Mode /Enlarge Selection
Orig.Image Margin/
Page #
Quality Centering
Sort/ Border Cover
Offset Erase Mode
Basic User choice
Function
Ready to copy.
Batch Scanning
Off
On
Paper Size
11x8½
100%
Combine
Batch
Up
Scanning
Form
Down
Overlay
Booklet
Program
Paper Size
11x8½
100%
Shortcut Back
Copy images from Document Process
platen for output as one job.