Setting Time Difference (Time Zone); Changing Management Code - Kyocera KM-8030 Advanced Operation Manual

Kyocera km-8030: user guide
Hide thumbs Also See for KM-8030:
Table of Contents

Advertisement

System Settings

Setting Time Difference (Time Zone)

Specifies the time zone in reference to Greenwich Mean Time.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
2
Press [ ] or [ ] to select Time
difference and press [Change #].
3
Press [+] and [-] to select the time zone.
4
Press [Close]. The touch panel will return to the Machine Default screen.

Changing Management Code

You can change the management code.
IMPORTANT: Be sure to make a note of the management code when it is changed.
NOTE: The default management code is 6000 for 60 cpm model and 8000 for 80 cpm model.
The new management code must be a number comprising of four digits from 0000 to 9999.
When installing the optional security kit, enter the eight-digit management code. By default, the
management code is 60006000 for 60 cpm model and 80008000 for 80 cpm model. The new
management code must be a number comprising of eight digits from 00000000 to 99999999.
Avoid using an administrator code that is easily determined, such as '11111111' or '12345678'.
Enter the following menu to make changes.
1
Access the Machine Default screen. (For instructions, refer to Accessing the Machine Default
Screen on page 3-20.)
3-32
- Default Settings for Copying
- Common Default Settings
- Job Accounting
- Weekly Timer
- Setting Document Management Defaults
- Hard Disk Management
- Printing Reports
System Menu / Counter
Machine Default
Default menu
Select Copy output mode
Tray A
Key sound ON/OFF
On
Silent Mode
Off
Date/Time
08/08/'04 07:00
Time difference
GMT+09:00
System Menu
Time difference
GMT+09:00
System Menu
-
Machine Default
Setting mode
Change #
Back

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km-603080306030

Table of Contents