Print Document; Enabling Job History Display - Kyocera KM-8030 Advanced Operation Manual

2
Press [ ] or [ ] to select Repeat Copy
and press [Change #].
3 Select [Off] to disable and select [On] to
enable repeat copy under Function. To
make repeat copy the default, select
[On] under Default.
4
Press [Close]. The touch panel will return to the Copy Default screen.

Enabling Job History Display

Enables or disables the [Job History] screen in output managements. The [Job History] screen
provides information on the completed jobs in the copier. For details, refer to Output Management
Functions on page 2-16.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [ ] or [ ] to select Job Queue
Report and press [Change #].
3
Select [Off] not to display the [Job
History] screen under Print Document
(Refer to Output Management Functions
on page 2-16). Select [On/All job] or
[On/reserved] ([On/Reserv.job]) to
display the [Job History] screen under

Print Document.

4 Press [Close]. The touch panel will return to the Copy Default screen.
System Menu / Counter
Copy Default
Default menu
Auto Rotation Rotate
Default margin width Left
Default erase width Border
Preset limit
Repeat Copy On / Default Off
System Menu
Repeat Copy
Select ON to activate Repeat Copy or OFF
to inactivate it.
Function
Off
On
System Menu - Copy Default
System Menu / Counter
Copy Default
Default menu
Default margin width Left ¼ "
Default erase width Border
Preset limit
Repeat Copy On / Default Off
Job Queue Report On(All job)
System Menu
Job Queue Report
Select On to activate Copy Job Log or Off
to inactivate it.
Off
On/
All job
On/
reserved
System Menu - Copy Default
System Settings
Setting mode
¼ " 0 "
¼ " ½ "
Center
Set
Change #
Back
Default
Off
On
Setting mode
0 "
¼ " Center ½ "
Set
Change #
Back
3-17