Adjusting Background Intensity; Adjusting Thin Lines - Kyocera KM-8030 Advanced Operation Manual

System Settings

Adjusting Background Intensity

If the background on copies appears too dark, you can lighten it.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [ ] or [ ] to select Background
exp. adj and press [Change #].
3
Press [Lighter] or [Darker] to adjust the
intensity.
4 Press [Close]. The touch panel will return to the Copy Default screen.

Adjusting Thin Lines

Depending on the using environment, paper or original, dragged stains may appear around
horizontal thin lines in some cases. To eliminate these stains, use the [Thinner] setting in this option.
NOTE: Copies are somewhat lighter in this mode.
1
Access the Copy Default screen. (For instructions, refer to Accessing the Copy Default Screen on
page 3-3.)
2 Press [ ] or [ ] to select Thin Line
adjustment and press [Change #].
3
Press [Thinner] or [Thicker] to adjust the
line thickness.
3-6
System Menu / Counter
Copy Default
Default menu
Exposure Mode Manual
Exposure Steps 1 step
Original Image Quality Text + Photo
EcoPrint Off
Background exp. adj. Standard
System Menu
Background exp. adj.
Able to adjust exposure of paper background.
Lighter
System Menu - Copy Default
System Menu / Counter
Copy Default
Default menu
Exposure Steps 1 step
Original Image Quality Text + Photo
EcoPrint Off
Background exp. adj. Standard
Thin Line adjustment 4
System Menu
Thin Line adjustment
Make adjustments if thin lines do not appear clearly
Images may lighten if adjusted to make lines thinner
Thinner
System Menu - Copy Default
Setting mode
Change #
Back
Darker
Setting mode
Change #
Back
Thicker