Output Destination - Kyocera KM-8030 Advanced Operation Manual

Output Destination

Particular trays of the document finisher or multi-job tray can be specified as the output destination
for accomplished copies.
Destination
Auto
Tray A
Tray B
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
NOTE: Requires the optional document finisher and multi-job tray.
You can change the default destination for copies. Refer to Selecting Output Destination on
page 3-29 for details.
You can check the record of where completed jobs were sent. Refer to Output Management
Functions on page 2-16 for details.
Follow the steps as below to select the output destination.
1 Press [Function] and then [
2
Press [Select of Output].
3 Select the output destination for finished
copies.
4 Place the originals in the document processor or on the platen. Press the Start key to start copying.
Description
Copies are sent to an empty tray. If multiple trays are empty, copies
are sent to the bottom tray first and higher trays thereafter.
Sent to the tray A of the document finisher.
Sent to the tray B of the document finisher. This tray cannot be
specified when the multi-job tray is installed.
Sent to the tray 1 (the first tray) of the multi-job tray.
Sent to the tray 2 (the second tray) of the multi-job tray.
Sent to the tray 3 (the third tray) of the multi-job tray.
Sent to the tray 4 (the fourth tray) of the multi-job tray.
Sent to the tray 5 (the fifth tray) of the multi-job tray.
Down].
Ready to copy.
Auto
Rotation
EcoPrint
Repeat
Copy
Basic
Ready to copy.
Select of Output
Copying Functions
OHP Memo
Proof Copy
Backing Pages
Orig. Set Mirror
Invert
Direction Image
Select of Staple Multi-Page
Output /Punch Form
User choice Program
Function
Shortcut
Auto Tray 3
Tray A Tray 4 Select proper output tray to avoid
mixing jobs.
You can confirm output tray with o
Tray 1 Tray 5
management.
Tray 2
Paper Size
11x8½
100%
Up
Down
Paper Size
11x8½
100%
Back
1-49