Kyocera KM-8030 Advanced Operation Manual page 81

Output Destination
Specify the optional document finisher or multi-job tray as the output destination as follows.
1
Press [Edit]. On the next screen, press
[Select of Output].
NOTE: The option to select the output
destination is displayed only if the
copier is equipped with the optional
document finisher or multi-job tray.
The output destination setting applies
to all other steps. Simply complete this
setting once as an initial step.
2
Specify the output destination. Refer to
Output Destination on page 1-49 for
details.
3 Press [Close].
Ready to Job build.
Place originals then press Start key.
Job Build Step
Auto
Off
Border Select Repeat
Erase Orig.Size Copy
None None
Margin/ Select of
Page #
Centering Output
Basic
Quality
Ready to Job build.
Place originals then press Start key.
Select of Output
Auto Tray 3
Tray A Tray 4
Tray 1 Tray 5
Tray 2
Copying Functions
Off
1 sided copy-Left
Tray A
Finished page #:
Edit
Back
Select proper output tray to avoid
mixing jobs.
You can confirm output tray with out
management.
1-75