Deleting All Documents In Box - Kyocera KM-8030 Advanced Operation Manual

System Settings
4
To name the box, select Box name and
press [Change #].
5 Enter the box name and press [End].
For instructions on entering characters, refer to Entering Characters When Using Document
Management Functions on page 3-58.
6 Specify the password to the box. Select
Password and press [Change #].
7
Use the numeric keys to enter the
password and press [Close].
NOTE: The password should be a
number up to 8 digits.
If you prefer not to specify a password,
press [Clear]. Press [Enter].
8 Press [Close]. The touch panel will return to the screen as shown in step 3 above. To specify a
name and a password to the other boxes, repeat steps 3 and 8.
9 Press [Cancel]. The touch panel will return to the Document Management screen.

Deleting All Documents in Box

You can delete all documents in the Synergy Print Boxes at once.
1 Access the Document Management screen. (For instructions, refer to Accessing the Document
Management Screen on page 3-42.)
2 Under Synergy Print Box, press [Box
Editing].
3-46
Box 001
Default menu
Box name
Password (No register)
System Menu - Document Management
Box 001
Default menu
Box name
Password
System Menu - Document Management
password.
Password
Clear
- Document Management - Box Editing
Document Management
Document Management
Shared Data Box
Print
the list
Reset
Box
System Menu
Setting mode
Change #
- Box Editing
Setting mode
(No register)
Change #
- Box Editing
Back
(Enter by #key)
- 001
Synergy Print Box Form box
Print Box Print
the list Editing the list
Reset Document Reset
Box save term Box
Close