Fireplace Xtrordinair Model Determination; Travis Industries Model Determination - Travis Industries Spirit 300 GS Service Manual

1 - 6

Fireplace Xtrordinair Model Determination

Fireplaces & Inserts
Model, Vintage, Ser. #
36 DV -A
1995
1004-5967
36 DV -R
1996
25002-25298
36 DV- A/R
1997
30000 & continuing
FPX 32 DVS Insert & Fireplace

Travis Industries Model Determination

Fireplaces & Inserts
Model, Vintage, Ser. #
DVS Insert
1996
80000 & continuing
DVS Fireplace
1997
100001 & continuing.
Travis Industries
Introduction
Burner Description
Arch face only.
Phase 2
have no intake restrictor. Ser. Nos. 3038-5967 are natural gas or
96 DVL
LP and have an exhaust restrictor with pivot adjustor at the top
front of unit behind finish face. Firebox is 30-1/2" wide at front.
40,000 BTU
Rectangular face only.
Phase 2
front of unit behind face. Firebox is 30-1/2" wide at front.
96 DVL
40,000 BTU
Will accept arch or rectangle faces. Intake restrictor adjustor is
Phase 2
a lever located under burn pan at left side. Firebox is 30-1/2"
96 DVL
wide at front. Natural gas burner (40,000 BTU) is standard
feature with parts to convert to LP gas included.
40,000 BTU
Phase 2
97 DVS
31,000 BTU
Burner Description
Must be installed into existing zero clearance or masonry
Phase 2
fireplace. Will accept arch or rectangle faces. Firebox is 24"
97 DVS
wide at front. No intake restrictor. 31,000 BTU natural gas
burner is standard with parts to convert to LP gas included.
31,000 BTU
This unit is a zero clearance fireplace. Intake restrictor is a
Phase 2
three position lever under burner at right. Will accept either arch
97 DVS
or rectangle face. Firebox is 24" wide at front. 31,000 BTU
natural gas burner is standard with parts to convert to LP gas
31,000 BTU
included.
Gas T-Shoot Guide
Ser. Nos. 1004-3037 are natural gas only and
All have an exhaust restrictor at the top
See Travis Industries DVS Insert or
DVS Fireplace
19203