Burner Orifice Removal - Travis Industries Spirit 300 GS Service Manual

Burner Pan Components
4 - 6

Burner Orifice Removal

Follow the directions below to remove the orifice. When re-installing the orifice, apply thread sealant
to the threads and tighten in place with a 1/2" open end wrench.
a
Push the adjustable shutter to the
left, off the orifice (be careful not
to bend the shutter linkage).
Adjustable
Shutter
Shutter
Linkage
d
Use a 1/2Ó open
end wrench to
unscrew the
orifice.
Travis Industries
b
Slide the adjustable shutter
down, away from the orifice.
Orifice
e
Gas T-Shoot Guide
c
Remove the spring
f
There is usually a
number stamped here
to indicate orifice size.
Apply thread
sealant to the
new orifice
prior to
installation.
Make sure to keep any
sealant or debris from
entering the orifice and
blocking gas flow.
19203