Avalon 700 & 700 Dv - Travis Industries Spirit 300 GS Service Manual

3 - 2
Avalon 700 & 700 DV
Remove the door following the directions below.
Unscrew and remove the door handle.
NOTE: When re-installing, make sure the handle points away from the glass when finished.
The door components are shown below.
The glass is held in place with
the retainer clips and a 5" piece
of 3/8" flat white gasketing.
Door Gasket -
7/8" rope gasketing is held in place with gasket cement.
Use a 5/16" nutdriver for the retaining clip screws.
3/8" flat gasketing behind the retaining clips (prevents
the glass from cracking when being secured.
Travis Industries
Door & Glass Removal
Swing the door until it is open 90¡
Retaining
Clip
Gas T-Shoot Guide
Lift the door up and away from the heater.
Cross
Section
Glass Gasket -
Glass
3/8" dia. white rope gasket
Door
Frame
Make sure
there is a
small space
around the
edge of the
glass
25903