Travis Industries Spirit 300 GS Service Manual page 56

5 - 12
Blower Snap Disk Removal - All Models Except Heritage Bay Stove & 36-DV
Warning Make sure the power cord is disconnected prior to conducting service.
Warning Shut off gas to the heater - you may need to disconnect the gas line
depending upon the heater location and the type of gas connection.
Inserts
1 Remove the insert from the fireplace (remove the panels, glass and logs first to prevent
damage while moving the insert).
2 With the right rear of the heater exposed, the blower snap disk may be removed from its
mounting bracket. Disconnect the black & white wires from the snap disk (orientation
does not matter when re-connecting).
Stoves
1 Remove the rear panel (see the instructions under ÒBlower RemovalÓ for the model being
serviced - pages 5-1 through 5-3).
2 With the right rear of the heater exposed, the blower snap disk may be removed from its
mounting bracket. Disconnect the black & white wires from the snap disk (orientation
does not matter when re-connecting).
Travis Industries
Blower Components
Gas T-Shoot Guide
Remove the snap disk from its
bracket behind the firebox.
Phillips
Screwdriver
Blower Snap Disk
610046
T-O-D 60T12
9305
F120-10F
Remove the snap disk from its
bracket behind the firebox.
Phillips
Screwdriver
Blower Snap Disk
610046
T-O-D 60T12
9305
F120-10F
19203