Thick Facing with Fireplace Xtrordinair (FPX) Arched Faces
The following illustration shows facing considerations for those fireplaces utilizing FPX arched faces.
The facing must be non-combustible and over 1" (25mm) in depth.
The Fireplace Xtrodinair 564
Masonry Template is recommended
for masonry installation (sku
98500674). The template helps
locate and support the masonry as it
is installed.
Before installing the masonry,
install the FPX FaceUpgrade Kit
(98500683). This kit covers the
upper corners.
TOP VIEW
Framing
Fireplace
Face
Masonry
Travis Industries
Installation
Raised Fireplaces:
Install the masonry above the base
of the fireplace to a maximum of 1" (25mm).
Nailing Bracket
Drywall
(
for qualified installers only)
Masonry Line
Floor-Mounted Fireplaces or Raised Hearths:
Build the hearth above the fireplace to a maximum
of 1" (25mm). The fireplace may be raised to
accommodate thicker hearth materials.
FRONT VIEW
61" Radius (1549mm)
36-1/4"
921mm
4150330
37
2-3/4"
70mm
29"
737mm
1"
25mm
100-01408