Burner Pan Removal - Bvm, Dvs & Dvm Burners - Travis Industries Spirit 300 GS Service Manual

Burner Pan Components
4 - 4
Burner Pan Removal - BVM, DVS & DVM Burners
Remove the burner pan following the directions above.
NOTE: When installed, the log
shelf must maintain a parallel
3/8Ó gap to the burner pan.
Remove the two screws holding the
burner box front in place.
Slide the burner pan to the left until the fixed shutter
disengages from the orifice. Place the burner pan aside.
Burner Pan Box
Travis Industries
The rear log shelf slides on and off the
burner pan assembly
a
1/4" Nutdriver
Remove the burner box front.
b
Rotate the burner pan
upwards.
c
Burner Pan
Gas T-Shoot Guide
Rear
Rear
Log
Log
Shelf
Shelf
Make sure the two tabs
slide over the side of the
burner pan on both sides.
Burner Pan
Assembly
Fixed shutter
Position the
shelf so the
back edges
of the shelf
and burner
pan are flush.
Orifice
19203