Basic Operation; Emergency Frequency; Setting A Frequency - Icom IC-A22 Instruction Manual

ms 3
BASIC OPERATION
lM Accessing the 121.5 MHz
emergency frequency
The IC-A22 can quickly access the 121.50 MHz emergency
frequency. This function can be activated even when the
keypad lock function is in use. (p. 12)
@ Rotate [VOL] to turn power ON.
@® Push [F] on the keypad.
*° @ "appears.
@® Push [© 121.5] to call the emer-
gency frequency.
@ Push [CLR] to exit from the
emergency frequency.
EXAMPLE: Setting the frequency to 120.000 MHz using the keypad.
i Setting a frequency
© Using the keypad
@ Rotate [VOL] to turn power ON,
@ Push [CLR] to select frequency mode when "M" or "WX"
appears in the function display.
@ Push 5 appropriate digit keys to input the frequency.
* Enter [1] as the 1st digit.
* When a digit is mistakenly input, push [CLR] to clear the
input, then start again.
« Push [ENT] to enter consecutive zero digits.
* Only [2}, [5], (7] or [0] can be entered as the Sth and final digit.
@ To change the frequency according to the tuning step
(25 kHz step), push [A] or [W].
Push and hold [A] or ['W] to change the frequency quickly,
Decimal point appears.
[ew
4575 |_. ;
EXAMPLE: Setting frequency to 136.425 MHz using the keypad.
Oe @@
(Phang as | 8 ager || TET
Decimal point appears.
@
— | 36He25