D Contest Number Set Mode; Number Style; Count Up Trigger; Present Number - Icom IC-7850 Instruction Manual

5
RECEIVE AND TRANSMIT
Electronic keyer functions (Continued)
■

D Contest number set mode

This mode is used to set the Number style, Count up
trigger and Present number.
• Setting contents
 The Multi-function screens are OFF:
Push [KEYER](F).
q
• The Memory keyer screen is displayed.
Display the Memory keyer menu screen, then push
w
[001](F).
[EXIT/SET]  001 [F-3]
• The Keyer 001 screen is displayed.
Push [ p](F) or [q](F) to select the item.
e
Rotate [MAIN DIAL] to set the desired setting.
r
• Hold down [DEF](F) for 1 second to select the default
setting.
Push [EXIT/SET].
t
Exits the Keyer 001 screen.

Number Style

This item sets the numbering system used for contest
(serial) numbers— normal or short morse numbers.
• Normal: Does not use short morse numbers
• 190➔ANO: Sets 1 as A, 9 as N and 0 as O.
• 190➔ANT: Sets 1 as A, 9 as N and 0 as T.
• 90➔ NO: Sets 9 as N and 0 as O.
• 90➔ NT: Sets 9 as N and 0 as T.

Count Up Trigger

This selects which of the four memories will contain
the contest serial number exchange. The count up trig-
ger allows the serial number to be automatically incre-
mented after each complete serial number exchange
is sent.
• Selectable memory: M1 ~ M8.

Present Number

This item shows the current number for the count-up
trigger channel set above.
• Rotate [MAIN DIAL] to change the number (001 ~
9999), or hold down [001CLR](F) for 1 second to re-
set the current number to 001.
(Default: Normal)
(Default: M2)
(Default: 001)
5-12
(F) Function keys
• Keyer 001 screen
[EXIT/SET]