Configure System - Graco PCF Instructions Manual

Configure System

Define the number of installed fluid plates. If a fluid plate
is listed as "Uninstalled" the screens for that fluid plate
will not appear in the run or setup screens.
1. With the system in setup mode, navigate to the Sys-
tem screen.
2. Press to access the fields to make changes.
3. Use the arrow keys to navigate to the desired field.
4. Press to open the Dispenser (Fluid Plate)
drop-down list, and select Fluid Plate or Uninstalled.
Press to finalize the selection.
5. Repeat for the other Dispenser numbers.
6. Press to exit edit mode.
F . 19
IG
3A2098A
System Setup
29