Run Mode - Graco PCF Instructions Manual

Run Mode

Run mode screens are divided into five sections: home,
fluid plates, events, errors, and jobs. While in Setup
mode press to enter Run mode. Press
to navigate through the Run mode screens.
Home Screen
The Home screen shows an overview for each of the
individual fluid plates. The Home screen displays the fol-
lowing items:
• Open dispense valves
• Active style number and name
• Flow rate
• Inlet and outlet pressures
• Progress bar indicating actual amount dispensed
(blue shaded portion), requested volume (upper and
lower arrows) and target volume (end of white bar).
NOTE: If the Home screen on your ADM does not
look like the image below then this manual does not
apply to your system; refer to manual 313377 for
your system. Otherwise, use this manual.
3A2098A
Appendix A - Advanced Display Module (ADM)
99