Models - Graco PCF Instructions Manual

Models

Models
Check the identification (ID) plate for the 6-digit part number of the fluid metering system. Use the following matrix to
define the construction of the system, based on the six digits. For example, Part PF1110 represents a PCF fluid
metering system (PF), a two style system (1), a fluid plate with a cartridge regulator and no meter (1), a DeviceNet
user interface (1) with a 100-240 Vac power supply (0).
NOTE: To order replacement parts, see Parts section in this manual. The digits in the matrix do not corre-
spond to the Ref. Nos. in the Parts drawings and lists.
PF
Third Digit
First and
Second Digits
Style/Size
Description
PF 1
(Precision
2
Continuous
Flow)
3 256 Styles
◆ Discrete Gateway systems do not include automation interface cables. The following Graco accessories are avail-
able for wiring to the automation system. Installers should follow Appendix B - Discrete Gateway Module (DGM)
Connection Details, page 104, for custom wiring.
For single fluid plate systems only: 50 ft (15 m) cable with flying leads (123793)
All systems: Breakout board (123783) and 50 ft (15 m) cable (123792)
❄ These fluid metering systems have ETL certification.
NOTE: Fluid metering systems with heated mastic regulators are not ETL certified.
9902471
Certified to CAN/CSA C22.2 No. 61010-1
Conforms to
UL 61010-1
This product has been tested to the requirements of CAN/CSA-C22.2 No. 61010-1, second edition, including Amend-
ment 1, or a later version of the same standard incorporating the same level of testing requirements.
4
1
Fourth Digit
Regulator
1 ❄Cartridge
2 Styles
❄Mastic
16 Styles 2
3 ❄Cartridge
❄Mastic
4
5 Heated
Mastic
6 Heated
Mastic
7 ❄Cartridge
C
1
1
Fluid Plate
Meter
None 0
None 1
High 2
Resolution
High 3
Resolution
Heated 4
Standard
Resolution
None
Ultra High
Resolution
1
Fifth Digit
User Interface
Description
◆Discrete
0
™ 1
DeviceNet
™
EtherNet/IP
™
PROFIBUS
™
PROFINET
™
0
Sixth Digit
Voltage
Description
100 - 240 Vac
24 Vdc
3A2098A