Upgrade Gateway Module Fieldbus Map - Graco PCF Instructions Manual

Maintenance
Upgrade Gateway Module
Fieldbus Map
NOTE: The fieldbus connection is temporarily dis-
abled during the use of a map token. The following
instructions apply to all Gateway modules.
1. Remove the access cover.
F . 41: Remove Access Cover
IG
2. Insert and press map token firmly into slot.
NOTE: There is no preferred orientation of the
token.
68
Access
Cover
TI12319A
3. Press and hold the push button for three seconds
and then release. The red indicator light (CK) will
flash twice, pause, and then once after the data map
is uploaded.
CK
Token
F . 42: Insert Token
IG
4. Remove map token (CC) when software has suc-
cessfully uploaded.
5. Replace access cover.
TI12320A
Push Button
3A2098A