Cisco 12416 Installation And Configuration Manual page 363

Chapter 7 Maintaining the Router
Unseat the power shelf from the chassis
Step 5
a.
b.
The DC-input power shelf weighs approximately 10.2 pounds (4.6 kg). Use two
Warning
hands to remove the power shelf.
Figure 7-42 Unseating the Power Shelf
jackscrew
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Loosen the two captive screws on each side of the power shelf.
Loosen the ejector jackscrew to unseat the power shelf from the connectors
on the chassis power interface panel.
Ejector
Removing and Replacing the DC-Input Power Shelf
(Figure 7-42):
Captive screws
(2 on each side)
7-71