Troubleshooting The Rp - Cisco 12416 Installation And Configuration Manual

Troubleshooting the Processor Subsystem

Troubleshooting the RP

Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
5-18
When the router is powered on, the alphanumeric display on the RP indicate the
following (Figure 5-5):
Upper row—Indicates which RP software component is running. At the end
•
of a successful boot process, this display reads MSTR.
Lower row—Indicates the current phase of the boot process. At the end of a
•
successful boot process, this display reads GRP or PRP depending on the RP
type.
Figure 5-5 RP Alphanumeric Display
Chapter 5
Upper alphanumeric
LED display (four digits)
Lower alphanumeric
LED display (four digits)
Troubleshooting the Installation
OL-11495-01