Removing and Replacing the Optional 2-Level AC-Input Power Shelf
Step 9
Figure 7-35 Reconnecting AC Power Cords
Step 10
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
7-56
Reconnect each of the AC power cords to the back panel of the power shelf and
secure them in place with their retention clips
Power cord
retention clip
Reinstall the power supplies as described in
Power Supply" section on page 7-33
Chapter 7
(Figure
7-35).
"Removing and Replacing an AC
beginning with
Step
6.
Maintaining the Router
OL-11495-01