Cisco 12416 Installation And Configuration Manual page 303

Chapter 7 Maintaining the Router
Removing and Installing the Front Covers and Bezel Extenders on Original Cisco 12000 Series Routers
Step 2
Figure 7-5 Removing the Air Filter Door Front Cover
Air filter door
Step 3
OL-11495-01
Remove the (4) screws from each corner that fasten the partial front cover to the
air filter door (Figure
Set aside the screws; you will need them to install the replacement front
•
cover.
Hold the replacement front cover by its outside edges and align the screw holes in
the front cover with the holes on the air filter door.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
7-5).
Air filter
door cover
Guide pin
Cover screw
(2 on each side
of door)
Captive screw
7-11