Cisco 12416 Installation And Configuration Manual page 330

Removing and Replacing an AC Power Supply
Remove the 2500W PEM
Step 5
a.
b.
c.
Figure 7-22 Removing a 2500 W AC Power Supply
Install the power supply:
Step 6
•
•
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
7-38
Loosen the captive screw to release the ejector handle.
Pivot the ejector handle down to eject the power supply from its backplane
connector.
Slide the power supply out of its bay while supporting it with your other hand.
Pwr Ok Fault
Temp
OC
For 2000 W PEM—Go to
For 2500 W PEM—Go to
(Figure 7-22):
Pwr Ok Fault
Temp
OC
Pwr Ok Fault
Temp
OC
Step 7.
Step 8.
Chapter 7 Maintaining the Router
OL-11495-01