Chapter 7
Maintaining the Router
Removing and Replacing the Optional 2-Level
AC-Input Power Shelf
Caution
Caution
Step 1
OL-11495-01
Use the following procedure to remove and replace the optional 2-level AC-input
power shelf.
To remove and replace the power shelf, the system must be powered off. Notify
the network administrator and other appropriate personnel that all routing traffic
stops while the upgrade takes place.
If you are upgrading to a new power shelf, you cannot use original power supplies.
You must upgrade to newer, 2500 W power supplies (see
Remove all of the power supplies as described in
Power Supply, page
7-33.
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
Removing and Replacing the Optional 2-Level AC-Input Power Shelf
Table 7-1 on page
Removing and Replacing an AC
7-30).
7-51