Cisco 12416 Installation And Configuration Manual page 323

Chapter 7 Maintaining the Router
Table 7-1 Original and Replacement Components
Original Component
AC Power Supply (PWR-GSR16-AC=)
Use to replace original 2000 W AC power
supplies only. All power supplies in the
power shelf must be 2000 W. Do not mix
with newer, 2500 W power supplies.
DC Power Shelf (PWR-GSR16-DC-SH=)
Compatible only with 2000 W DC PEMs. Do
not use with newer, 2400 W PEMs.
DC Power Supply (PWR-GSR16-DC=)
Use to replace original 2000W DC PEMs
only. All PEMs in the power shelf must be
2000 W. Do not mix with newer, 2400 W
PEMs.
OL-11495-01
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
Removing and Replacing AC and DC Power Subsystem Components
Replacement Component
AC Power Supply (12000/16-AC-PWR=)
Used to replace existing AC power supplies. All
power supplies in the power shelf must be 2500 W.
Do not mix with older, 2000 W power supplies.
Caution: 2500 W AC power supplies require new
power shelves (GSR16-SHLF-AC= or
GSR16-SHLF-AC4=).
DC Power Shelf (12000/16-DC-SHELF=)
Compatible only with newer, 2400 W DC PEMs.
Do not use with older, 2000 W PEMs.
DC Power Supply (12000/16-DC-PWR=)
Used to replace existing DC power supplies. All
PEMs must be 2400 W. Do not mix with older,
2000W PEMs.
Caution: 2400 W DC PEMs require new power
shelves (GSR16-SHLF-DC=).
7-31