Chapter 7
Maintaining the Router
Removing and Replacing an AC Power Supply
OL-11495-01
This section provides the procedure to remove an AC power supply from the
standard single-level AC power shelf. The procedure to remove an AC-input
power supply from the optional double-level AC-input power shelf are identical
to these; only the slot locations for AC-input power supplies are different.
Figure 7-18
shows AC power shelves housing original series 2000 W power
supplies.
Figure 7-18 Standard and Optional AC Power Shelves
PWR OK
FAULT
TEMP
I LIM
a
Standard AC-input power shelf
PWR OK
FAULT
TEMP
I LIM
PWR OK
FAULT
TEMP
I LIM
b
Optional AC-input power shelf
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
Removing and Replacing an AC Power Supply
PWR OK
FAULT
PWR OK
FAULT
TEMP
TEMP
I LIM
I LIM
PWR OK
FAULT
TEMP
I LIM
PWR OK
FAULT
TEMP
I LIM
7-33