Cisco 12416 Installation And Configuration Manual page 299

Chapter 7 Maintaining the Router
Removing and Installing the Front Covers and Bezel Extenders on Original Cisco 12000 Series Routers
Figure 7-2 Attaching the Bezel Extenders to a Card Cage Front Cover
1
1 Line card and RP card cage front cover (bezel) 3
2
Mounting screws
Step 5
OL-11495-01
Hold the card cage front cover by its outside edges and align the ball studs with
the ball stud clips on the front of the chassis
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
2
4
2
Ball studs
4
Right and left side bezel extender
(Figure
3
3
7-3).
7-7