Cisco 12416 Installation And Configuration Manual page 329

Chapter 7 Maintaining the Router
Remove the 2000 W PEM
Step 4
a.
b.
c.
The power supply weighs approximately 12 pounds (5.4 kg). Use two hands when
Caution
handling the power supply.
Figure 7-21 Removing a 2000 W AC Power Supply
Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide
OL-11495-01
Release the ejector lever by lifting the spring clip.
Pivot the lever down to eject the power supply from its backplane connector.
Slide the power supply out of its bay while supporting it with your other hand.
PWR OK
FAULT
TEMP
I LIM
Removing and Replacing an AC Power Supply
(Figure 7-21):
PWR OK
FAULT
TEMP
I LIM
PWR OK
FAULT
TEMP
I LIM
7-37