Mounting The Modules On A Din Rail - Mitsubishi Electric LCPU-U-HW Safety Manuallines

3.3

Mounting the Modules on a DIN Rail

This section explains the procedure for mounting the modules on a DIN
rail.
POINT
An example of the use of the DIN rail stopper is described in the following procedure. Fix the
module according to the manual of the DIN rail stopper used.
(1) Mounting procedure
1. Pull down DIN rail hooks on
the back of the modules until
they click.
2. Hang the upper tabs of the
modules on a DIN rail, and
push the modules in position.
Applicable DIN rail model
name
(IEC 60715)
• TH35-7.5Fe
• TH35-7.5Al
• TH35-15Fe
3. Lock the DIN rail hooks to the
DIN rail to secure the modules
in the position.
Pull the hooks up until they
click.
If the hooks are beyond the
reach, use a tool such as a
driver.
41