Connecting Modules - Mitsubishi Electric MELSEC L Series User Manual

6.2.1
This section describes a procedure for connecting modules with an example of how to connect a head module to the
L61P.
Shut off the external power supply (all phases) used in the system before connecting or disconnecting modules.
(1) Connecting procedure
Release
38
Downloaded from ManualsNet.com

Connecting modules

(1)
Lock
(1)
search engine
1.
Release the module joint levers located at the top
and bottom of the head module.
2.
Slide the lever toward the front side of the module
until it clicks. To release the lever, pull the
projection (1) of the lever.
3.
Insert the connector of the power supply module
into that of the head module so that they are
securely engaged.
4.
Lock the module joint levers.
5.
Slide the lever toward the back side of the module
until it clicks. Check that the modules are securely
connected. To lock the lever, push the projection (1)
of the lever.